Restoring factory settings just restores the default settings and options that a computer had when you first got it or first buy it (they were specified as it was built in a factory, thus the name). In doing this the computer is often wiped clean and essentially erased to bring it back to its initial state.
Bringing initial state might cause you to erase you documents and saved files , specially stored in your primary directory or partition.
Below is the instructions of Laptop Recovery of several name brand .
Dell Factory Recovery Instructions :
1. Reboot, and press Ctrl + F11 at the Dell logo.
2. The Dell™ PC Restore by Symantec screen will come up.
3. Select "Restore" or use the Tab key to highlight it and press Enter.
4. if you wish to continue, click "Confirm", or use the Tab key to highlight it and press Enter.
5. When the utility is finished, click "Finish", or use the Tab key to highlight it and press Enter.
Dell Official Site Instructions For Factory Restore
HP/Compaq Recovery Instructions :
1. Reboot, and repeatedly press F10 at the HP logo until the recovery screen appears.
2. When the recovery screen appears, press "Next" and then "Yes" to perform a non-destructive recovery.
3. To perform a destructive recovery, click "Advanced" and then "Yes".
4. After the recovery is finished, the laptop will reboot.
Hp Officail site Instructions for Factory Restore
Gateway Recovery Instructions :
1. Reboot, and press F11 or the R key to start the recovery process.
2. Select either "Full System Restore (Destructive)" or "Full System Restore (With Backup)"*.
3. Click "Next", and then click "Yes" to confirm the recovery process.
4.Wait for the computer to restore itself. When it is done, click "Reboot" to reboot the computer.
*Full System Restore With Backup preserves data in the My Documents folder, but requires 4 GB of disk space.
Gateway Official Site Instructions For Factory Restore
Acer Recovery Instructions
1. Power on the machine
2. At the white ACER BIOS screen, hold the “Alt” key and press the “F10” key simultaneously to start Acer eRecovery
3. Once eRecovery has loaded, click “Restore to Factory Default Settings”
4. Click “OK” to continue
5. From here, the eRecovery process will update all the data on the C: drive and restore a fully functional factory image (approximately 10 minutes).
6. Once eRecovery has run, press “OK” to reboot unit
Bringing initial state might cause you to erase you documents and saved files , specially stored in your primary directory or partition.
Below is the instructions of Laptop Recovery of several name brand .
Dell Factory Recovery Instructions :
1. Reboot, and press Ctrl + F11 at the Dell logo.
2. The Dell™ PC Restore by Symantec screen will come up.
3. Select "Restore" or use the Tab key to highlight it and press Enter.
4. if you wish to continue, click "Confirm", or use the Tab key to highlight it and press Enter.
5. When the utility is finished, click "Finish", or use the Tab key to highlight it and press Enter.
Dell Official Site Instructions For Factory Restore
HP/Compaq Recovery Instructions :
1. Reboot, and repeatedly press F10 at the HP logo until the recovery screen appears.
2. When the recovery screen appears, press "Next" and then "Yes" to perform a non-destructive recovery.
3. To perform a destructive recovery, click "Advanced" and then "Yes".
4. After the recovery is finished, the laptop will reboot.
Hp Officail site Instructions for Factory Restore
Gateway Recovery Instructions :
1. Reboot, and press F11 or the R key to start the recovery process.
2. Select either "Full System Restore (Destructive)" or "Full System Restore (With Backup)"*.
3. Click "Next", and then click "Yes" to confirm the recovery process.
4.Wait for the computer to restore itself. When it is done, click "Reboot" to reboot the computer.
*Full System Restore With Backup preserves data in the My Documents folder, but requires 4 GB of disk space.
Gateway Official Site Instructions For Factory Restore
Acer Recovery Instructions
1. Power on the machine
2. At the white ACER BIOS screen, hold the “Alt” key and press the “F10” key simultaneously to start Acer eRecovery
3. Once eRecovery has loaded, click “Restore to Factory Default Settings”
4. Click “OK” to continue
5. From here, the eRecovery process will update all the data on the C: drive and restore a fully functional factory image (approximately 10 minutes).
6. Once eRecovery has run, press “OK” to reboot unit
No comments:
Post a Comment